YALE SMART LOCK REKEY HOW TO
YALE SMART LOCK REKEY INSTALL
YALE SMART LOCK REKEY FULL

Insert new pins as indicated by the kit’s instructions. 4: Remove the existing pinsĭump out the pins in the cylinder plug on the table, and insert the new key you want the lock to work with. The follower fills the void left as the plug is removed and it holds in all of the top components in place. While keeping the follower tool firmly against the rear of the plug, pull the plug out of the housing. Insert the existing key and rotate it 45 degrees. Place the follower at the back of your cylinder plug. Before you remove the plug from the housing, you need to be sure that the top pins and springs are held in place.

YALE SMART LOCK REKEY FULL

Your lock is full of top pins and springs. If not followed, your pins will fly everywhere. Your rekey kit will have a c-clip removal tool to help remove and replace it. The key cylinder (sometimes referred to as the plug) is held to the housing with either a c-clip or a nut. Your rekey kit normally includes a little wire tool, that you can poke into that hole and once poked the knob/handle can be slid off and the cylinder removed. For knobs and levers you will need to find the hole that allows you to remove the front of the knob/lever and expose the clip.

YALE SMART LOCK REKEY HOW TO

On deadbolts the lock cylinder is usually held in place with a screw and it will be very obvious how to remove it.įor knobs or levers, it’s not so obvious. View our article on How to Replace Locks if you need to remove the locks. These instructions assume the lock is in your hands, and not installed. You’ve bought your rekey kit, and you’re ready to try to rekey the locks. Any of our four Arizona Lock & Key Shops will rekey them for you at purchase for no additional cost. Some big box stores do it too, but they may charge for the service. When you buy from a locksmith or a hardware store, they will often rekey locks to match a different existing key at no cost. Have the Store You Purchased From Rekey the Locks

Though you will get charged to rekey locks you bring to them, rekeying in a lock shop is a very affordable solution.

YALE SMART LOCK REKEY INSTALL

To save money, always take them into a lock shop, don’t install them (so the locksmith doesn’t have to go to your location). If you’ve ordered the locks online, a locksmith will rekey them for you in their store.

Rekey Kits on Amazon Take the Locks to a Locksmith Shop for Rekeying This is useful when you are replacing a lock with another and want to make sure that what you buy can be rekeyed to match your existing key. The table below shows brands that will typically work together. But that’s not always possible or desired. To guarantee you can rekey a new lock to an old key, buy locks from the same manufacturer. Key-Compatible Lock BrandsĮven though locks may be made from a different company, several companies use the same keyways, or similar-enough so that a key from one lock will work with the other brand. These two locks cannot be rekeyed to match an existing key of the other. It is impossible to slide a Kwikset key into a Schlage lock and vice versa. You can see that the low spot of the Kwikset do NOT match the low spots on the Schlage. I’ve highlighted, in black, the low spots on the left side of a Kwikset and Schlage key. Locks contain a cylinder plug that has grooved sides so that only a its brand of key can slide into the keyhole. The two most popular door lock manufacturers in American are Kwikset and Schlage. If the key will not slide in, the cylinders (keyways) are different, and that lock cannot be made to work with that key. If it slides in, the new door lock can be rekeyed to use the same key. To test if they are teh same keyway, take the key you want to use, and see if it slides into the key hole of the new lock. You can rekey locks to match existing keys when the locks have the same keyway.

When you want EVERY lock in the house to work from the same key, Rekeying the lock is the answer. You buy replacement door locks, and now you want the new locks to work with the current house key. Or you might find yourself doing the same thing. This can happen when the previous home owner bought a replacement and installed it, usually to replace a broken lock. Say you’ve bought a home, but there are one or two locks in the home that work off of a different key than rest of the locks (or, you’ve simply don’t have a key for one or two of the locks). How to Rekey a Lock Yourself Determine if Locks Can Use the Same Key Determine if the Lock can be Rekeyed to Your Existing Key

Yale smart lock rekey